Does anyone remember how to change the the status page to go from copystar to TA kyocera, pretty sure its in service mode! maybe under destination or oem code. the service manual does not explain it well.
Does anyone remember how to change the the status page to go from copystar to TA kyocera, pretty sure its in service mode! maybe under destination or oem code. the service manual does not explain it well.
It's called Destination. U265 > Copystar = 66, Kyocera Mita =2, Utax = 11, Olivetti = 12
But keep in mind that your machine may no longer accept the original badge's toner. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Awesome! Thank you
One time I change an Olivetti to Kyocera.
Machine will not recognizes Olivetti toner as original so I put a Kyocera toner.
Kyocera toner will not enter because a plastic pattern on the bottom of cardtrige will not match.
I have to disassembly machine and planed plastic theeth that makes the pattern.
Bye!
Kyove
Bookmarks