Hello Experts,
this is my 1st post to get guideline how to get rid of these repeating prints.
repeat printing comes on 1st few copies if we use multiple copies from Original.
but if we copy single print from the Originals then each copy have Repeatings.
please guide me.
Originally Posted by husnainsafder1
Could be your drum unit , try to stop the printed page just as it gets past the drum unit and check if the fault is evident on drum surface, also check if the heat rollers is worn
Try to check your cleaning blade...or your whole drum unit try to replace.
Get out your ruler and check the interval that it repeats at. That will help you identify whether it's drum cleaning, or fuser multiple imaging. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks