Well... so much for the new and improved charger rollers....310 K with measles...Ohh Joy.
Cheers and Happy New Year to all.
Well... so much for the new and improved charger rollers....310 K with measles...Ohh Joy.
Cheers and Happy New Year to all.
This is a MC-8705 with one of those lumps biopsied. Note how the rubber is burned/absent from the surface of the metal core, but not through to the surface where the lump is. Anecdotally, this is caused by corrosion of the surface of the metal core.
Spots-Lumps.jpg
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Was the update designed for the bumps or for lines?
Yep, just replaced one on a 6052ci for bumps. It really takes 5-6 years to resolve this ?
Great and i thought my troubles were over.![]()
What is even worst is that they are back ordered. Kyocera needs to get there shit together.
In Australia we've been told to use MC-8720 charge rollers in place of the MC-8705. Too early to tell but they seem to last longer.
They changed the foam/felt cleaning roller underneath for a spiraled foam cleaning roller.
Like so:
MC-8720.JPG
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Yeah that's the one. I know they look different but that's what they told us use.
Bookmarks