hi every one
i have problem in km2560 the screen shows
" program loading " and stop
i change hard disk - ram - boat chip
but dosn't work
please help
thanks
hi every one
i have problem in km2560 the screen shows
" program loading " and stop
i change hard disk - ram - boat chip
but dosn't work
please help
thanks
The last one that I had with this problem I fixed by putting in a new memory stick
Have you tried these suggestions ?
http://www.copytechnet.com/forums/ky...71=#post584204
i need the softwaer which can i make by it upgrade
i get the firmware of KM3060
but when i try to download it , the screen get black and the memory flashing over more than 30 minutes
please help
Try to disconnect the hard drive
Try to turn on the machine.
the last situation is " i change the control panel and the machine warm up then complete loading program , thanks GOD and thank you all "
but , i have now error code " C6000"
by the way i was change a lot of things during fixing the last problem , like Main PCB , DC controller , .... and others {Engine PWB (EPWB) - Main PWB (MPWB) }
could you help me for fixing new problem ( C6000 )
thanks for support
Bookmarks