i have recently bought taskalfa 8000i recondition machine. but now i am facing a problem regarding its copy and print result. i have changed the charging unit, developing unit but in vain. i also cleared the the mirrors and LD unit glass
121.jpg
i have recently bought taskalfa 8000i recondition machine. but now i am facing a problem regarding its copy and print result. i have changed the charging unit, developing unit but in vain. i also cleared the the mirrors and LD unit glass
121.jpg
How does the fuser look?
i didn't got you dear. would you like to tell me in detail
It looks to me that the fuser needs replaced.
Print a A3 report from user menu (open any other A4 trays) and stop the sheet half way through the engine.Part of A3 just about fuser and the rest below drum and you'll see where the issue is coming from.
I suspect drum, but thats me.
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
I vote for the DV unit...We could stop the guessing by simply measuring the distance between the repeating dark bands and checking the repetitive defect guide.
check and re-install the charge roller. clean debris from charge roller cleaning brush.
check and re-install the drum, inspect drum grounding contact. apply conductive grease to the drum rod pointy-end.
reset developer bias to default values?
Those are my first guesses.
There might be helpful information in the distance between repetitive marks on the page(mm)
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks