Thanks: 
Likes: This machine is calling for maintenance kit B and Banding colors (See pic). Should I install it or replace machine... Thanks so much
Dislikes: 0
This machine is calling for maintenance kit B and Banding colors (See pic). Should I install it or replace machine... Thanks so much
My guess is that you've got a broken yellow developer spacer. When the yellow drum gets too close to the yellow mag roller the developing roller will arc to the drum, shutting down the HVT momentarily. When the primary charge drops out you'll get a bar of C, M, Y, and K.
Why do I think it's yellow? Well it could be any color ... but that yellow feature at the right of your page is an incomplete yellow bar that did not cause the HVT to completely drop out. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I believe you nailed it. THANKS SO MUCH !!! Going to order Drum developer for all the colors. It boggles my mind how much insight you have on these machines. I so appreciate your help !!!Originally Posted by blackcat4866
BlackCat like many other Techs here are very helpful...Just be sure to " Like " and " Thank " someone that has provided a proper fix. This is the way that we techs build our " Rep " here.
Another way you can express your appreciation is to help others with your experience. And you will get that experience, just takes some time and persistence.
I give extra consideration to those that can be seen offering their advice, and take the time to gather accurate complete observations. So far so good. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I read your ordering parts for this
That’s ok but the parts are not cheap and will quickly go beyond what we would consider “economically viable” on a machine of this model especially as it’s done 200k in colour. Has it also had the A kit done recently?
Perhaps the money might be better spent on a Task Alfa replacement.
All the best.
Reply With Quote
Bookmarks