Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    581
    Rep Power
    0

    FS 6525 olivetti 253)

    A capacitor blew up at power supply , I fixed power sypply and an erro 6030 appeared .
    This error is about thermistor . Can it be something else connected to power supply.

  2. #2
    Service Manager 10,000+ Posts
    FS 6525 olivetti 253)

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,608
    Rep Power
    658

    Re: FS 6525 olivetti 253)

    Quote Originally Posted by Gab View Post
    A capacitor blew up at power supply , I fixed power sypply and an erro 6030 appeared .
    This error is about thermistor . Can it be something else connected to power supply.

    DAMN RTFM! you post quite a few questions .... but it seems you NEVER look in the manual. When the rest of post problems here, we have already been thru the manual and it doesn't have a clear fix or the fix doesn't solve the issue and all possibilities have been exhausted.


    the thermistor is in the fuser.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Feb 2015
    Posts
    212
    Rep Power
    22

    Re: FS 6525 olivetti 253)

    Quote Originally Posted by Phil B. View Post
    DAMN RTFM! you post quite a few questions .... but it seems you NEVER look in the manual. When the rest of post problems here, we have already been thru the manual and it doesn't have a clear fix or the fix doesn't solve the issue and all possibilities have been exhausted.


    the thermistor is in the fuser.
    Once you replace thermistor remember to reset error code, u163 if I am not mistaken

    Sent from my SM-G930V using Tapatalk

  4. #4
    Service Manager 10,000+ Posts
    FS 6525 olivetti 253)

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,608
    Rep Power
    658

    Re: FS 6525 olivetti 253)

    Quote Originally Posted by patrickjlc View Post
    Once you replace thermistor remember to reset error code, u163 if I am not mistaken

    Sent from my SM-G930V using Tapatalk
    hell if he broke out the manual he could have answered his own question... but no.. don't research... just pick others brains ... smmfh

    that's why he has 100+ posts and ZERO rep power!
    Last edited by Phil B.; 04-23-2018 at 09:52 PM.

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    581
    Rep Power
    0

    Re: FS 6525 olivetti 253)

    Quote Originally Posted by Phil B. View Post
    hell if he broke out the manual he could have answered his own question... but no.. don't research... just pick others brains ... smmfh

    that's why he has 100+ posts and ZERO rep power!
    If you read my post i refer that manual says it's thermistor. I just ask if it can be something else.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    torino
    Posts
    150
    Rep Power
    29

    Re: FS 6525 olivetti 253)

    but the fuser heater turn on?

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Feb 2015
    Posts
    212
    Rep Power
    22

    Re: FS 6525 olivetti 253)

    Quote Originally Posted by avio2 View Post
    but the fuser heater turn on?
    With a c6030 will only turn on for a second before the bad thermistor is detected and give the code again. Replace the thermistor, or fuser unit if you have one, run sym u163 and done.

    Sent from my SM-G930V using Tapatalk

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    torino
    Posts
    150
    Rep Power
    29

    Re: FS 6525 olivetti 253)

    Quote Originally Posted by patrickjlc View Post
    With a c6030 will only turn on for a second before the bad thermistor is detected and give the code again. Replace the thermistor, or fuser unit if you have one, run sym u163 and done.

    Sent from my SM-G930V using Tapatalk
    Well but GAB repair pwb in Advance
    Sure that correct tensione at Heather Fuser?

  9. #9
    Service Manager 10,000+ Posts
    FS 6525 olivetti 253)

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,608
    Rep Power
    658

    Re: FS 6525 olivetti 253)

    Quote Originally Posted by Gab View Post
    If you read my post i refer that manual says it's thermistor. I just ask if it can be something else.
    "This error is about thermistor . Can it be something else connected to power supply."

    there is your post...doesn't say a DAMN thing about the MANUAL just " "This error is about thermistor " you could look up that information on GOOGLE.

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    torino
    Posts
    150
    Rep Power
    29

    Re: FS 6525 olivetti 253)

    Quote Originally Posted by Phil B. View Post
    "This error is about thermistor . Can it be something else connected to power supply."

    there is your post...doesn't say a DAMN thing about the MANUAL just " "This error is about thermistor " you could look up that information on GOOGLE.
    but instead of calling it back, you can not give it any information
    What's the use of a forum otherwise?

    Defective connector
    cable or poor
    contact in the connector.
    Reinsert the connector. Also check for continuity
    within the connector cable. If none,
    replace the cable.
    Fuser heater and power source PWB
    (YC102)
    Fuser unit and engine PWB (YC7)
    Deformed connector
    pin.
    See page 1-4-15.
    Defective triac. See page 1-4-15.
    Defective fuser
    thermistor.
    Replace the fuser unit (see page 1-5-21).
    Defective engine
    PWB.
    Replace the engine PWB and check for

    for me: 1° misure resistance heater fus and correct tension

    Broken fuser heater wire
    Abnormally high fuser
    thermistor temperature
    Broken fuser thermistor
    wire
    Abnormally low fuser
    thermistor temperature
    Deformed connector
    pin.
    If the I/F connector pins of the fuser unit and
    the main unit are deformed owing to foreign
    matters, such as paper dusts, replace the
    connectors or the units including the connectors.
    Defective triac. Remove the power cord and check that the
    resistance between terminals T1 and T2 of
    the triac TRA51 is of several Mega-Ohms
    and not shorted (see figure 1-4-2). If failed,
    replace the power source PWB (see page 1-
    5-35).
    Figure 1-4-2

    2° pwb

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here