Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    Kyocera 3010I doc. feeder troubles..


    Join Date
    Sep 2011
    Posts
    225
    Rep Power
    31

    Kyocera 3010I doc. feeder troubles..

    Hey Folks,
    have a customer with a 3010I series, and the document feeder, intermittantly willjam..I noticed the lower plate not always lift up...I removed solinoid, clean and put a drop of oil on the plunger...worked for a little bit...has anyone encountered this trouble..?
    I'm guessing I need to order a solinoid, but thought I'd check for any other input..?

    Thanks,
    Jaime
    I.C.S.
    CT.

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Dec 2015
    Location
    Pooler, GA
    Posts
    290
    Rep Power
    22

    Re: Kyocera 3010I doc. feeder troubles..

    Check the width sensors on the feeder. They are attached to the front and rear guides underneath. Have sent the contacts get dirty and not read the proper size paper.

  3. #3
    Senior Tech 100+ Posts
    Kyocera 3010I doc. feeder troubles..


    Join Date
    Sep 2011
    Posts
    225
    Rep Power
    31

    Re: Kyocera 3010I doc. feeder troubles..

    Quote Originally Posted by mincopier View Post
    Check the width sensors on the feeder. They are attached to the front and rear guides underneath. Have sent the contacts get dirty and not read the proper size paper.
    would that cause the lifer plate, to not lift?, whats happening, is that lifter plate doesnt rise up, so the pick up rollers spin, but the paper is too low position, to grab the paper.

  4. #4
    Master Of The Obvious 10,000+ Posts
    Kyocera 3010I doc. feeder troubles..

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,434
    Rep Power
    462

    Re: Kyocera 3010I doc. feeder troubles..

    Oiling a solenoid is the surest way to make it misfire. Start by soaking out both parts in alcohol then cleaning the bore with a Q-tip. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Field Supervisor 500+ Posts ntbann's Avatar
    Join Date
    Jan 2012
    Location
    Port Huron
    Posts
    577
    Rep Power
    34

    Re: Kyocera 3010I doc. feeder troubles..

    Just had one that the post snapped off the lift plate. Not a good design.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here