Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Technician
    Join Date
    Oct 2017
    Location
    Baton Rouge
    Posts
    34
    Rep Power
    14

    7002i says processing. Sits there.

    Hi. I have a 7002i. Will can the org. On glass or feeder. Says processing but just sits there. No error codes. Just will not print. Swapped fuser and updated fw. No help. 906. Unplugged also. No jam sensors blocked. Will not also print internal. Stays in status job. Any ideas.

  2. #2
    Technician
    Join Date
    Oct 2017
    Location
    Baton Rouge
    Posts
    34
    Rep Power
    14

    Re: 7002i says processing. Sits there.

    Wow this a good one. Called hotline. They said they were stumped when they first had this. He asked me to leave open 3&4 cass. Make it use only the two top trays.it worked! There was a tiny jam jammed back in the no.3 feed unit. Didn't see it at first. It will not show and jams of lift error c codes. Took it out. Rock and roll.

  3. #3
    Senior Tech 250+ Posts Zesti's Avatar
    Join Date
    Jun 2009
    Posts
    283
    Rep Power
    33

    Re: 7002i says processing. Sits there.

    Wow....
    That's kind of TIA......

  4. #4
    Master Of The Obvious 10,000+ Posts
    7002i says processing.  Sits there.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: 7002i says processing. Sits there.

    Quote Originally Posted by Devdumper View Post
    Wow this a good one. Called hotline. They said they were stumped when they first had this. He asked me to leave open 3&4 cass. Make it use only the two top trays.it worked! There was a tiny jam jammed back in the no.3 feed unit. Didn't see it at first. It will not show and jams of lift error c codes. Took it out. Rock and roll.
    Nice! Thanks for sharing! =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Senior Tech 100+ Posts kjg's Avatar
    Join Date
    Mar 2009
    Location
    TN
    Posts
    111
    Rep Power
    35

    Re: 7002i says processing. Sits there.

    Thank you for sharing!
    good heads up info.

  6. #6
    Service Manager 100+ Posts Raymondd's Avatar
    Join Date
    Jan 2008
    Location
    Louisiana
    Posts
    108
    Rep Power
    34

    Re: 7002i says processing. Sits there.

    Just had the same thing.

    Thanks for sharing!!!

  7. #7
    Technician
    Join Date
    Oct 2017
    Location
    Baton Rouge
    Posts
    34
    Rep Power
    14

    Re: 7002i says processing. Sits there.

    NP.

  8. #8
    Service Manager 1,000+ Posts
    7002i says processing.  Sits there.


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: 7002i says processing. Sits there.

    I'm not clear. If the scrap is in (example) tray 3, no tray will work?

  9. #9
    Senior Tech 250+ Posts progoffice's Avatar
    Join Date
    Nov 2008
    Posts
    319
    Rep Power
    49

    Re: 7002i says processing. Sits there.

    Yep. Seen this one before too. It also can happen on the older 00 and 01 series machines.

  10. #10
    Owner/Service Manager 1,000+ Posts
    7002i says processing.  Sits there.

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: 7002i says processing. Sits there.

    I had it on an 8001i today. I wish I would have known this before I replaced the fuser, HDD's, memory & firmware.
    It is worth bumping it up so someone else might see it though.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here