F24X |
An error is detected at the
System management section |
1) Check contact of the DDR memory and check function.
2) Format the HDD and check function. (U024 FULL formatting)
3) Execute the U021 Memory initializing to initialize the controller backup memory
and check function.
4) Replace the main board and check function.
5) Replace the HDD and check function.
6) Retrieve the USBLOG and contact the Service Administrative Division. |
*The F248 eror is printer
process error. if it repeats
with a certain print data,
retrieve the capture data and
USBLOG. |
[DDR2 memory contact check]
Main board:YS1 or YS2
A certain part of the memory be
faulty. The frequency of failure
occurrence is dependent on the
frequency of access to the
faulty bit. The ASIC may be
faulty if the memory is not
sensitive. |
Bookmarks