Hello !
Its the second time I have TK 5500i Copier , that both went to diferent customers and few days later the client call me saying that the machine doesnt show anything in the panel "Blank" but we can ear the printer working ...
Allready search in Forum and everybody says that its the MAIN BOARD ...
Can anyone send me by PM the Bulletin Technique about that ? (I heard in forum) and I have all firmwares but no Bulletin Techniques ...
Regards
I don't know what this "Bulletin Technique" is. Are you asking how to load firmware? How to back up user data? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
If I remember right. There was a problem with the main boards on the machines when they first came out, they came out with an updated board to prevent the blank screen from happening. There is probably a bulletin on this.
please friends, kindly help us for the bulletin code number if you have an idea.This problem is also affecting me seriouslyOriginally Posted by Tonerkiller
You may have a loose connector. See step 14 in the attachment. The wide FFC cable can come loose from shock and cause this symptom. Be careful with the lock on the connector
Allready tried ONE PANEL from 100% working machine but no luck ... Still dead ...
Did you attempt to load firmware after installing the op panel? I didn't think this needed saying, but you must re-load firmware when installing any Kyocera circuit board. It's a sure way to create a firmware level conflict when you install a board with a different level of firmware. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
can you send me panel firmware.
masom_68dk@yahoo.com
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks