copystar CS 3550ci

[1stcavvet]

I have a color maintanance kit ---3 drums, 3 dv units etc After installing the new dv units on the drums and replacing all 3 units in the machine. there are a few sims for the dv units and another set for the drums, do I do all the dv's first then the drums or is there some other procedure to do all 3 pcu's together??? thanx

[Ropariva]

I have a color maintanance kit ---3 drums, 3 dv units etc After installing the new dv units on the drums and replacing all 3 units in the machine. there are a few sims for the dv units and another set for the drums, do I do all the dv's first then the drums or is there some other procedure to do all 3 pcu's together??? thanx

Start with 930. That resets the charge rollers. Then 119 for the drums. Reboot and then do 464. That’s all the devs need. Then 412 followed by 464 again then 410 for the final tone curve. All good!

[1stcavvet]

thanks for the info , feel a little better about the job now

[marc]

You can do service mode 952 that give you step by step after you replace the PM kit