He also failed to mention if the prints on the U034 were normal or if they looked off as well
u034 was perfect... I wanted to rule out the print driver... so I sent our IT person and he told me that whatever I did fixed the issue... must have taken some time to kick in...
all I did when I was there was perform the drum, developer refreshes... laser scanner cleaning...
the only thing I was thinking of trying after that would be to do calibrations recommended in this thread and do high altitude adjustment after that... a long time ago I had a similar issue and high altitude adjustment fixed it...
well thats my two cents... sorry about not getting back to you guys... and merry christmas...
and thanks for all your help...
Sad To Say I Don't Have a Life
I do this stuff on the weekends too
Bookmarks