Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Service Manager 1,000+ Posts
    4002i internal finisher weird problem


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    4002i internal finisher weird problem

    New machine only 500 prints, DF7100

    Approach the machine and the exit tray is down.

    Make a single copy the screen flashes "exit tray full remove paper" for a second then the tray lifts and it prints.

    Then after it prints the tray moves all the way down (full position) and the process repeats itself.

    It's odd that it corrects itself.

    I resested connectors, removed and reinstalled it, flashed firmware. Tested sensors in SIM.

  2. #2
    bladson
    Guest

    Re: 4002i internal finisher weird problem

    Just for kicks, have you tried U906?

  3. #3
    Service Manager 1,000+ Posts
    4002i internal finisher weird problem


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: 4002i internal finisher weird problem

    I believe I did. Not that 906 makes sense either but like you said just for kicks. I have the finisher pwb on order. If it doesn't fix it I'll try to link a video

  4. #4
    This Space For Rent 100+ Posts JimHegs's Avatar
    Join Date
    Jan 2009
    Location
    Snohomish, WA
    Posts
    105
    Rep Power
    34

    Re: 4002i internal finisher weird problem

    Quote Originally Posted by JR2ALTA View Post
    I believe I did. Not that 906 makes sense either but like you said just for kicks. I have the finisher pwb on order. If it doesn't fix it I'll try to link a video
    Is it in direct sunlight for part of the day? a million years ago Kyocera had a finisher that would lower its tray due to sun glare hitting a sensor, they ended up putting a filter (it looked like yellow a thermistor film) over the sensor to correct the problem.
    Follow me on Twitter at http://www.twitter.com/JimHegs

  5. #5
    Service Manager 1,000+ Posts
    4002i internal finisher weird problem


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: 4002i internal finisher weird problem

    There is a tremendous amount of glare on the screen if you don't tilt it but I can't see how it would hit the finisher

    Video making 10 copies

    YouTube

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Apr 2017
    Location
    Manitoba
    Posts
    348
    Rep Power
    20

    Re: 4002i internal finisher weird problem

    Isn't the resting position of the new internal finisher tray *down*?

  7. #7
    Service Manager 1,000+ Posts
    4002i internal finisher weird problem


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: 4002i internal finisher weird problem

    Quote Originally Posted by sparkycivic View Post
    Isn't the resting position of the new internal finisher tray *down*?
    I'm not sure. Honestly on this screwed up finisher ive seen it idle both ways. I guess it depends how the last user left it. And both ways end up erroring out

  8. #8
    Master Of The Obvious 10,000+ Posts
    4002i internal finisher weird problem

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: 4002i internal finisher weird problem

    Does the rack drive "clack ... clack ... clack" when it reaches bottom? I had one that got tweeked in transportation. The lower limit switch wasn't being actuated at the bottom of the travel. I had different symptoms though ... I'm pretty sure that mine errored out. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    Service Manager 1,000+ Posts
    4002i internal finisher weird problem


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: 4002i internal finisher weird problem

    No clack. There's a video with sound in above post.

    The video is of me making 10 copies of 1 original. I am not doing anything but recording. The tray somehow realizes it's not actually full and takes one more sheet.

  10. #10
    Technician RobertOB's Avatar
    Join Date
    Dec 2018
    Location
    Belleville
    Posts
    26
    Rep Power
    11

    Re: 4002i internal finisher weird problem

    Silly question, have you popped it open and checked to make sure all the sensor's connectors are connected right?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here