Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Posts
    109
    Rep Power
    21

    image failure M and K on TA-4052CI

    dear All,

    has somebody had this fenomena in the past.
    what was the solution.
    tech already changed dk and Dv, high voltage pcb, and still the same negative result see sample in att.

    any positive feedback is welcome.

    best regards.
    Attached Images Attached Images

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    368
    Rep Power
    16

    Re: image failure M and K on TA-4052CI

    Did that tech do all the adjustments from maintenance after replacing those parts?

  3. #3
    Technician RobertOB's Avatar
    Join Date
    Dec 2018
    Location
    Belleville
    Posts
    25
    Rep Power
    1

    Re: image failure M and K on TA-4052CI

    CHeck your wiring harness for the Belt

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Posts
    109
    Rep Power
    21

    Re: image failure M and K on TA-4052CI

    Quote Originally Posted by Kyo fan View Post
    Did that tech do all the adjustments from maintenance after replacing those parts?
    yes indeed , they went together for a second time and did all the sim over again with the same negative result.

  5. #5
    Service Manager 1,000+ Posts
    image failure M and K on TA-4052CI


    Join Date
    Feb 2010
    Posts
    1,418
    Rep Power
    42

    Re: image failure M and K on TA-4052CI

    I'd say there's some defect or contamination involving the transfer belt. I'm thinking inside the belt ass'y because the hazy spots aren't moving to other colors

  6. #6
    Master Of The Obvious 10,000+ Posts
    image failure M and K on TA-4052CI

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,173
    Rep Power
    286

    Re: image failure M and K on TA-4052CI

    My suggestion is to swap the magenta with the yellow drum. I've done this before and was surprised to notice the problem gone. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Posts
    109
    Rep Power
    21

    Re: image failure M and K on TA-4052CI

    hi Guys,

    some feedback
    i went to the machine together with Kyocera HQ.

    they initialized machine with sim 20.
    possible reason electrical noise!
    power on machine => problem solved.
    we calibrated the machine properly.
    checked all values and problem is permanently solved.

    strange solution for strange problem

  8. #8
    Service Manager 1,000+ Posts
    image failure M and K on TA-4052CI


    Join Date
    Feb 2010
    Posts
    1,418
    Rep Power
    42

    Re: image failure M and K on TA-4052CI

    Crazy s#!t

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Feb 2018
    Location
    Orlando, Fl
    Posts
    76
    Rep Power
    3

    Re: image failure M and K on TA-4052CI

    Quote Originally Posted by taskalfaman View Post

    they initialized machine with sim 20.
    There is no Sim U020 on this machine. Was it possibly U002, "Set Factory Default"?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here