Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11
    Field Supervisor 500+ Posts
    KM5050 random faint gray line


    Join Date
    Oct 2007
    Location
    San Diego, CA
    Posts
    969
    Rep Power
    47

    Re: KM5050 random faint gray line

    Quote Originally Posted by daveh12 View Post
    There is a drum blade that sits in front of the drum unit, its comes as part of the maintenance kit, it can become stuffed with paper dust and residual toner. has this been replaced or cleaned out?
    No it has not.
    How is that removed, through the front or from the left side?
    I am going back with a new developer unit today so I can look at that part as well.

  2. #12
    Service Manager 1,000+ Posts
    KM5050 random faint gray line


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: KM5050 random faint gray line

    I think he's referring to the dust catch that snaps in. They're usually red in color. That whole area/cavity should be vacuumed out.

  3. #13
    Field Supervisor 500+ Posts
    KM5050 random faint gray line


    Join Date
    Oct 2007
    Location
    San Diego, CA
    Posts
    969
    Rep Power
    47

    Re: KM5050 random faint gray line

    Replaced developer unit and cleaned dust collector still have line.
    Is it possible for laser to cause this?

  4. #14
    Master Of The Obvious 10,000+ Posts
    KM5050 random faint gray line

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: KM5050 random faint gray line

    Laser? Unlikely.

    I think I would very closely examine the area around the drum for fibers dangling onto the drum surface. I've found fibers stuck to the grid, statically attracted to the drum blade, or stuck to the upper developer seal ... really anywhere within reach of the drum. These fibers can be very very fine, and nearly impossible to see.

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #15
    Service Manager 1,000+ Posts
    KM5050 random faint gray line


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: KM5050 random faint gray line

    5050 paper path is simple as they come. With a clean machine and new OEM parts and supplies there cannot be this defect. Are you on site or one of your techs? Something doesn't add up.

    Maybe the paper has defects from factory?

  6. #16
    Field Supervisor 500+ Posts
    KM5050 random faint gray line


    Join Date
    Oct 2007
    Location
    San Diego, CA
    Posts
    969
    Rep Power
    47

    Re: KM5050 random faint gray line

    Quote Originally Posted by JR2ALTA View Post
    5050 paper path is simple as they come. With a clean machine and new OEM parts and supplies there cannot be this defect. Are you on site or one of your techs? Something doesn't add up.

    Maybe the paper has defects from factory?
    It is me and I agree it doesn’t add up.
    sounds like a good idea to check the paper at this point.
    Here is one more sample and notice none of them are on the same line or position
    100B5459-53B5-4EBF-A88A-EF744906146E.jpg

  7. #17
    Defective Technician 50+ Posts
    Join Date
    Jun 2008
    Location
    Oceanside NY
    Posts
    80
    Rep Power
    33

    Re: KM5050 random faint gray line

    Quote Originally Posted by blackcat4866 View Post
    Laser? Unlikely.

    I think I would very closely examine the area around the drum for fibers dangling onto the drum surface. I've found fibers stuck to the grid, statically attracted to the drum blade, or stuck to the upper developer seal ... really anywhere within reach of the drum. These fibers can be very very fine, and nearly impossible to see.

    =^..^=
    This.
    Last edited by Hose1cook; 01-10-2019 at 03:49 PM.

  8. #18
    Field Supervisor 500+ Posts
    KM5050 random faint gray line


    Join Date
    Oct 2007
    Location
    San Diego, CA
    Posts
    969
    Rep Power
    47

    Re: KM5050 random faint gray line

    Quote Originally Posted by Hose1cook View Post
    This.
    Thanks, I will give it another look

  9. #19
    Technician
    Join Date
    Apr 2008
    Location
    Andalusia,Al.
    Posts
    22
    Rep Power
    33

    Re: KM5050 random faint gray line

    What did you find on faint line? F0 lens dirty?

  10. #20
    Field Supervisor 500+ Posts
    KM5050 random faint gray line


    Join Date
    Oct 2007
    Location
    San Diego, CA
    Posts
    969
    Rep Power
    47

    Re: KM5050 random faint gray line

    Quote Originally Posted by JeffMills View Post
    What did you find on faint line? F0 lens dirty?
    Have not been back, told customer to call if gets more noticeable or more frequent

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here