These little plastic Kyocera paper feed roller clips, part #2A806250 (5MVX111DN003)
Have they been sub to another part # ???
I'm having trouble finding these at any of my vendors or online, short of ordering them direct from Kyocera
Anyone have a source for these, I need to get a couple packs of spares, thanks
5MVX111DN003 RING STOPPER/A-49 FEED A4
It is still the same P/N as of the current generation and parts list revision.
May I ask why you buy these? I keep a very small spare supply that I source from parts machines and almost never actually need to use them.
I just lose one every now and then in customers office, and have run out of my robbed supply from other equipment, I figured Precision Roller or Katun would have them, but no luck...
Gotcha. Any other source looks to be pretty expensive at $2-5 per clip + shipping. Not worth!
I'm a scavenger. Unless it's a very unusual size, I doubt I'll ever run out of C-clip, E-clips. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Have graveyard, will raid the tome stones....
Scrap one of your graveyard machines, or one of the oppositions trade-in machines.
Have the apprentice spend two hours with a screw gun and rip the machine down to nil.
I have a 2 litre icecream container full of miscellaneous,screws,e-clips,springs,washers,bushes and other one-off oddities.
I carry a tobacco tin full of similar miscellaneous bits in my tool case.
Last edited by NeoMatrix; 01-17-2019 at 10:28 PM.
Inauguration to the "AI cancel-culture" fraternity 1997...
•••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••
It's kind-of wonderful to dump out the miscellany and find the exact bit you need. =^..^=Originally Posted by NeoMatrix
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
my Dip cans (smokeless) work great once you sort out the items... a label on top will let u know the contents
Yea, I am a pack rat since 1988 with all these copier parts, but just the last couple of yrs. got into the Kyocera line that has all these little plastic clips, and they are thinner than some of the other equip. out there.
I will grab any off of a scrap machine in the future, heck I just wanted to order like a 5 or 10 pack somewhere easy, but seems like they are priced like gold and hard to find, lol
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks