Kyocera FS6525 error code F000

[athirsha]

I have kyocera fs6525 machine it shows f000 machine failure...please help
Can I get firmware of this machine..pls send link..pleaseeeeeee

email : athirsha2006@yahoo.com

[Phil B.]

I have kyocera fs6525 machine it shows f000 machine failure...please help Can I get firmware of this machine..pls send link..pleaseeeeeee
email : athirsha2006@yahoo.com

are you a kyocera cert tech?

[Santander]

I have kyocera fs6525 machine it shows f000 machine failure...please help
Can I get firmware of this machine..pls send link..pleaseeeeeee

email : athirsha2006@yahoo.com

Doubt that upgrading the firmware is going to solve your problem. The F0000 is a communications problem between the control panel and the the main PCB, you could try re-seating all the connectors on the control panel, but I have had a couple of these and replacing the main pcb solved the issue. Hope this helps.

[Phil B.]

Doubt that upgrading the firmware is going to solve your problem. The F0000 is a communications problem between the control panel and the the main PCB, you could try re-seating all the connectors on the control panel, but I have had a couple of these and replacing the main pcb solved the issue. Hope this helps.

I saw that when I googled the issue...
BUT i wanted to see if he even had a clue to research problems...
People laugh when I say " Google CAN be Your Friend "
OFW

[athirsha]

are you a kyocera cert tech?

no sir

[darry1322]

A C-F000 code can occur if your memory module is missing or bad.

[djs9164]

A C-F000 code can occur if your memory module is missing or bad.

I had one. It was the control board.


Sent from my XT1635-01 using Tapatalk