Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Junior Member
    Join Date
    Oct 2017
    Location
    Dundalk
    Posts
    5
    Rep Power
    0

    kyocera 5500i jamming in tray

    hello all,
    i have a 5500 that is jamming in tray 1.
    the paper is getting pinched between the pulley and separation rollers and getting pulled down into the housing for the separation roller. I'm using generic rollers (A00J563600) but have used them in many machines without issue.
    so far I've replaced the pickup assembly, cassette and feed drive clutches
    i cant find anything on this issue in the tech bulletins or on here and am at a loss.

    has anyone had this issue before and have any ideas?

    Thanks

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Posts
    131
    Rep Power
    31

    Re: kyocera 5500i jamming in tray

    please provide us the eventlog and statuspage.
    brand paper and paper weight.

    BR

  3. #3
    Junior Member
    Join Date
    Oct 2017
    Location
    Dundalk
    Posts
    5
    Rep Power
    0

    Re: kyocera 5500i jamming in tray

    Sorry i don't have the status page or error log to hand.
    i can tell you that the only error in the log was J0501 164 times.
    the machine has just shy of 700k prints on it and the paper is plain 80g motifpaper.com

    hope this helps...

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Oct 2012
    Posts
    653
    Rep Power
    35

    Re: kyocera 5500i jamming in tray

    Does it have the new style feed units? Did you look at the trouble shooting guide?

  5. #5
    Field Supervisor 500+ Posts Geo's Avatar
    Join Date
    Nov 2010
    Posts
    661
    Rep Power
    38

    Re: kyocera 5500i jamming in tray

    Quote Originally Posted by gwoodslive View Post
    hello all,
    i have a 5500 that is jamming in tray 1.
    the paper is getting pinched between the pulley and separation rollers and getting pulled down into the housing for the separation roller. I'm using generic rollers (A00J563600) but have used them in many machines without issue.
    so far I've replaced the pickup assembly, cassette and feed drive clutches
    i cant find anything on this issue in the tech bulletins or on here and am at a loss.

    has anyone had this issue before and have any ideas?

    Thanks
    Uhh...Silly question...Did you try new rollers?

  6. #6
    Trusted Tech 50+ Posts robscopyr's Avatar
    Join Date
    Mar 2009
    Location
    Redding, CA
    Posts
    54
    Rep Power
    31

    Re: kyocera 5500i jamming in tray

    [QUOTE=gwoodslive;740140]hello all,
    i have a 5500 that is jamming in tray 1.
    the paper is getting pinched between the pulley and separation rollers and getting pulled down into the housing for the separation roller. I'm using generic rollers (A00J563600) but have used them in many machines without issue.
    so far I've replaced the pickup assembly, cassette and feed drive clutches
    i cant find anything on this issue in the tech bulletins or on here and am at a loss.

    has anyone had this issue before and have any ideas?

    Thanks
    I'm using generic rollers (A00J563600)
    That is a part number for a Konica Minolta feed tire, are you sure that you are using the correct part?

  7. #7
    Master Of The Obvious 10,000+ Posts
    kyocera 5500i jamming in tray

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: kyocera 5500i jamming in tray

    I typically get twice the yield from the Konica rollers.

    I didn't see a copy count. What about clutches. They rust like crazy. Have (5) clutches if you're going to take it apart. They'll all look rusty. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Technician
    Join Date
    Feb 2015
    Location
    sacramento ca
    Posts
    11
    Rep Power
    19

    Re: kyocera 5500i jamming in tray

    Quote Originally Posted by Tonerkiller View Post
    Does it have the new style feed units? Did you look at the trouble shooting guide?
    do you have a part number?

  9. #9
    Field Supervisor 500+ Posts
    Join Date
    Oct 2012
    Posts
    653
    Rep Power
    35

    Re: kyocera 5500i jamming in tray

    Quote Originally Posted by rey View Post
    do you have a part number?
    Go to Kyoceras site and download the troubleshooting guide. It explains the situation that you are having.

  10. #10
    Junior Member
    Join Date
    Oct 2017
    Location
    Dundalk
    Posts
    5
    Rep Power
    0

    Re: kyocera 5500i jamming in tray

    Quote Originally Posted by Tonerkiller View Post
    Go to Kyoceras site and download the troubleshooting guide. It explains the situation that you are having.
    i have access to the kyocera tech site but i cant find anything about this issue, would you have a copy of the relevant tech doc so i could have a look please?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here