Hi Guys ,
I can't go to service mode after replacing the HDD , how can i reset this error C6000 , i checked the fuser is fine.
Godfrey
Hi Guys ,
I can't go to service mode after replacing the HDD , how can i reset this error C6000 , i checked the fuser is fine.
Godfrey
So you aren't going to check any of the fuser components?
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
sure as rain you Dismissed BlackCat's suggestions...
you mentioned checking the LAMPS...
what can pull down power?
hmmm a SHORT ... ?
sure slap another LVPS in it and when THAT doesn't fix it.. where do you go?
how do you know the thermistor or thermostat in the fuser isn't bad... those two items tell the fuser lamps to turn ON and HOW much power to give to the lamps!
how do you check them? hmmm resistance? hold the stat in your sweaty palm as you take the reading.. you will resistance change
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
BC.. I know this is one of your pet peeves also..
We have been around doing this when MOST were still attached to moms teet..
Go figure..
These are the type that "go on the list" for me...
Well 'maybe' he will reflect and in the future take advise from others like us..
But I'm done.
Sent from my SM-G960U using Tapatalk
Bookmarks