Thanks: 
Likes: 
Dislikes: Hi Guys ,
I can't go to service mode after replacing the HDD , how can i reset this error C6000 , i checked the fuser is fine.
Godfrey
Hi Guys ,
I can't go to service mode after replacing the HDD , how can i reset this error C6000 , i checked the fuser is fine.
Godfrey
Thanks, i managed to reset the fuser and HDD format but still the error C6000 come back.Originally Posted by Apkareno
I suspect the Power supply now what do you suspect to be the problem.
Godfrey
So you aren't going to check any of the fuser components?
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
How did you check that the fuser is ok?
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
i checked the Fuser lamps ,the thermostats with a digtal meter they were all ok .
For the Thermistor at least the fuser has to warm up a bit , but the fuser is very cold.
Godfrey
hello Apkareno ,
all the fuser components are good , when i cable socket for the fuser i measured 220 volts mains but putting the fuser cable in its socket the 220 VOLTS disappears and it measures Zero volts.
What can cause the 220 voltage drop?
Godfrey
sure as rain you Dismissed BlackCat's suggestions...
you mentioned checking the LAMPS...
what can pull down power?
hmmm a SHORT ... ?
sure slap another LVPS in it and when THAT doesn't fix it.. where do you go?
how do you know the thermistor or thermostat in the fuser isn't bad... those two items tell the fuser lamps to turn ON and HOW much power to give to the lamps!
how do you check them? hmmm resistance? hold the stat in your sweaty palm as you take the reading.. you will resistance change
Isn't it interesting when the poster lists all the reasons why it couldn't be ... but won't try what you suggest. It doesn't bother me. They may get there eventually ... or not. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
BC.. I know this is one of your pet peeves also..
We have been around doing this when MOST were still attached to moms teet..
Go figure..
These are the type that "go on the list" for me...
Well 'maybe' he will reflect and in the future take advise from others like us..
But I'm done.
Sent from my SM-G960U using Tapatalk
Reply With Quote
Bookmarks