Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 17
Pin-out for DF-790
Does anyone know the Pin-out of the DF-790 FN? What I need to do is be able to hook up the bracket wiring harness without a finisher. Essentially cheat the Finisher.
I see the wire harness has 7 small wires and 4 main large wires, with one large wire being Green (on the one i have).
I see the machine connector on the wire harness has the following slots with wires:
1-7 on top row have no wires
8-Grey thick wire
9-Thick Green wire
10 empty
1-7 on bottom row are small grey wires
8-9 are Thick grey wires
10-empty
Any Ideas?
Thanks,
Venluckey
-
Re: Pin-out for DF-790
That is going to be a tough one, If you had the attachment for the 790b.
you could run machine without finisher on it.
-
Senior Tech
100+ Posts
- Rep Power
- 22
-
Senior Tech
100+ Posts
- Rep Power
- 22
Re: Pin-out for DF-790
I should have included this one as well. Hope it helps.
5eVvsWQ.jpg
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks