Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Kyocera M2540 dw, drum installation issues/toner installations


    Join Date
    Sep 2011
    Posts
    180
    Rep Power
    0

    Kyocera M2540 dw, drum installation issues/toner installations

    Hi Folks,
    Kyocera M2540dw, had previous issues with jamming,turned out to be the fuser, was still under warranty , from Kyocera/ACM Technologies, I got a fuser, at no cost. Now I have a new issue, customer went to replace toner, must have removed the whole developer. I noticed, the left, black guide, wasnt in place. I tried to re-install, noticed a spring, that had fallen. So I brought the printer to my shop, as I couldn't, get developer to install , myself. Looking for help, to what I may need to look for , as I know, as this is installed, it opens/lifts shutters. I got the black guide plate in, still have troubles getting the developer unit to install properly. Anything, I need to look for, as to this guide plate, and the developer , going into the machine, properly..?

    Thanks,
    Jaime,
    Independent Copier Svc.
    Stonington, CT.

  2. #2
    Field Supervisor 500+ Posts
    Kyocera M2540 dw, drum installation issues/toner installations


    Join Date
    May 2009
    Location
    Concord, NH
    Posts
    566
    Rep Power
    31

    Re: Kyocera M2540 dw, drum installation issues/toner installations

    Did you check the drum shutter? It is very easy for the customer to pull on the shutter instead of the blue tabs to remove the drum dislodging the shutter from the guides? It may not be apparent and when you install the dv it can not raise the drum shutter keeping it from fully installing.

  3. #3
    Senior Tech 100+ Posts Ropariva's Avatar
    Join Date
    Mar 2016
    Posts
    146
    Rep Power
    8

    Re: Kyocera M2540 dw, drum installation issues/toner installations

    There is a flap that pops up on the drum. You can safely remove that and machine will work fine and dev will be able to be refitted easily.

  4. #4
    Senior Tech 100+ Posts
    Kyocera M2540 dw, drum installation issues/toner installations


    Join Date
    Sep 2011
    Posts
    180
    Rep Power
    0

    Re: Kyocera M2540 dw, drum installation issues/toner installations

    Quote Originally Posted by Ropariva View Post
    There is a flap that pops up on the drum. You can safely remove that and machine will work fine and dev will be able to be refitted easily.
    Thanks...I got the shutters, o.k., I actually taped the shutters open, to be sure of exposure, my 1st thought , was shutters, as I'm getting blan copies, even when I print out a status page. Stopped the copy in the middle, and no latent image on the drum.., checked all the contacts for drum and developer unit..has anyone else this issue?
    I'm stumped, aside from being and hvt...any suggestions, appreciated !

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here