If you change Sys. Menu/Count. menu > Printer > Color Setting to Black & White the Status Page will be printed i B&W but that shouldn't effect normal printing and copying.
If you change Sys. Menu/Count. menu > Printer > Color Setting to Black & White the Status Page will be printed i B&W but that shouldn't effect normal printing and copying.
Easiest way is use IC link
https://downloads.kyoceradocumentsol...Link%203.2.zip
Thank You everyone for your advise, I been tearing myself apart trying to figure out this thing. I go into comm setting set to Full color, Printer color setting set to color, Function color selection- Full Color. I took your advise and took out the color toners and the machine prints b/w and not ask for color toners. It scans, copies and print only in B/W. I got pissed off and went into the 1087 menu and cleared the memory, factory defaults, format SD Card and upgrade firmware to find out this piece of crap still see b/w only. I did found in the new firmware a upgrade fix to printing out in monochrome and reading color but i upgraded the firmware and still the same thing. The Kyocera tech support never heard of this and dont have a clue. You would think that initializing the memory would clear everything out. I am thinking its down to board level script. What do this mean in the new firmware?
Corrective measures for theunexpected monochrome outputin a certain functionThe data might be output with monochrome when using Prescribe CCPYcommand in the prolog / epilog functions of the KX driver while the full-coloroutput was expected
Bookmarks