Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Sep 2008
    Location
    AUBENAS
    Posts
    7
    Rep Power
    0

    Kyocera ecosys P3045DN error F4D6

    Hello everybody, I have an error F4D6 on this printer immediately at start up. Service mode is unavailable and I don't find this error code in the service manual. Any help appreciated. Thanks.

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Mar 2018
    Location
    Boston
    Posts
    57
    Rep Power
    3

    Re: Kyocera ecosys P3045DN error F4D6

    Quote Originally Posted by stephaneleclere View Post
    Hello everybody, I have an error F4D6 on this printer immediately at start up. Service mode is unavailable and I don't find this error code in the service manual. Any help appreciated. Thanks.
    Disconnect the printer from the network cable and see it it power on without a code. If it does there is a bad job in someone's print queue you will need to delete. Update firmware. Good luck.

    Sent from my XT1635-01 using Tapatalk

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Feb 2018
    Location
    Orlando, Fl
    Posts
    81
    Rep Power
    3

    Re: Kyocera ecosys P3045DN error F4D6

    Quote Originally Posted by stephaneleclere View Post
    Hello everybody, I have an error F4D6 on this printer immediately at start up. Service mode is unavailable and I don't find this error code in the service manual. Any help appreciated. Thanks.
    This code is associated with startup lockup when the machine is connected to KFS. It requires the latest firmware.
    See bulletin 2T6-0024 (J052)
    If the communication is not stable at the machine where the KFS is connected, there might be the possibility that the machine might not start up as the information from the machine cannot be sent to the server *1 and system error F60A, F4D6 or service call error C0100 [Back up memory device error] occurs.
    *1: The communication failure is once stored in the non-volatile memory of the machine. And after that, if the communication is successful, the latest information is sent at this point and deleted from the memory. However, the old information which is not the latest cannot be released and continue to accumulate. If this condition is repeated, memory overflow might occur.
    Note)
    This is the caution if the main unit locks up due to this cause, there might be the possibility that it might not be able to upgrade the firmware with the new one. Then, it is necessary to replace the main PWB.
    (Once upgrading the firmware to the new one, accumulated information can be released)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here