Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Apr 2019
    Location
    Anchorage
    Posts
    2
    Rep Power
    0

    Memory Full Message

    Anyone experiencing memory full errors, seems to be mostly on the 2 series so far. What we have found is once KFS is turned off it stops happening. These errors seem to lock up the machine. So far tech services been not much help.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Aug 2008
    Location
    Seattle
    Posts
    107
    Rep Power
    23

    Re: Memory Full Message

    It happened once to me during initial setup. Next day the problem went away. It did seem to happen after submitting the KFS access code. The memory light kept blinking and the machine displayed memory full when I tried to make copies.

    In other cases we have replaced main boards on those models to address memory full messages.

  3. #3
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,168
    Rep Power
    79

    Re: Memory Full Message

    I don't know if this is relevant to your machine issue...

    Some of the old Ricoh model machines would display Out of Memory Error when using SMB scan-to-folder.
    After MFD hardware was ruled out,our Techs found that the randomly sent SMB pages would not access the destination folder over the network.
    House cleaning of the destination SMB scan-folder can cause similar related issues.

    HTH
    What if we could count the stars... , what number would you stop at...?"
    [Exchange manual acquisitions, PM's CTN members only. ]
    [] |N | | o | M | Δ | t | π | | x | []

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Feb 2018
    Location
    Orlando, Fl
    Posts
    77
    Rep Power
    3

    Re: Memory Full Message

    Quote Originally Posted by aktech View Post
    Anyone experiencing memory full errors, seems to be mostly on the 2 series so far. What we have found is once KFS is turned off it stops happening. These errors seem to lock up the machine. So far tech services been not much help.
    For every machine you place on KFS, UPDATE THE FIRMWARE! I can not stress this enough. You can do so remotely overnight when the machine is online on KFS. All my techs, at one time or another, have called looking for a solution. The first thing I have asked everyone of them is "Did you update the firmware?" If the answer is no the next thing they hear is CLICK! It has always been important with Kyoceras to keep the firmware up to date, however with equipment on KFS, outdated firmware can, and will, hose main boards. ALWAYS update the firmware to the latest for Kyocera equipment. Hey, its free.

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Jan 2009
    Location
    Baton Rouge
    Posts
    104
    Rep Power
    22

    Re: Memory Full Message

    I've never really understood why firmware becomes outdated. It was good enough when it put in the first time, if it isn't causing any problems I don't see why it needs to be done although I generally do it anyway.

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Feb 2018
    Location
    Orlando, Fl
    Posts
    77
    Rep Power
    3

    Re: Memory Full Message

    Quote Originally Posted by Tom View Post
    I've never really understood why firmware becomes outdated. It was good enough when it put in the first time, if it isn't causing any problems I don't see why it needs to be done although I generally do it anyway.
    Sometimes problems become apparent after the initial release and these have to be addressed. In the case of the Kyocera machines on KFS, every time a new enhancement is introduced in the Fleet Services program, corresponding enhancements have to be added to the equipment to make them compatible. I will, however, concede that some frivolous appearing updates have magically corrected "unacknowledged" problems.

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Aug 2008
    Location
    Seattle
    Posts
    107
    Rep Power
    23

    Re: Memory Full Message

    I found the thread I started here when I had this problem:

    4002i warning low memory

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here