Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    Field Supervisor 500+ Posts Geo's Avatar
    Join Date
    Nov 2010
    Posts
    661
    Rep Power
    38

    Re: Kyocera KM 4035 no display only fan working

    If it has a fax,did you disconnect it.( all the boards)? If I remember correctly a malfunctioning fax will cause this..

  2. #12
    Master Of The Obvious 10,000+ Posts
    Kyocera KM 4035  no display only fan working

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Kyocera KM 4035 no display only fan working

    I was just preparing to ask: what did you do just before it died? Maybe installed a fax board?

    On one machine I bought a used fax board from Wulff Enterprises. The gentleman that removed the ribbon cables did not release them, just pulled them out. When I installed it the machine did some crazy stuff, then nothing at all. I'll cut/paste in the Excel record later. I eventually noticed that 4 of the conductors had peeled back from the ribbon cable, connecting poorly. I got extraordinarily lucky, and was able to trim off 1.5mm of the end of the ribbon and got it to connect properly. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #13
    Master Of The Obvious 10,000+ Posts
    Kyocera KM 4035  no display only fan working

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Kyocera KM 4035 no display only fan working

    Can't access service mode. Can't download fax firmware. Can't access Fax Defaults in the System Menu (only the double beep). Can't access Fax Reports tab in the Fax screen (button grayed out). "Cover Open" indication when no covers are open. "Please Wait. Cannot be combined." when attempting to fax out. Ribbon cable from the fax control PWB to the main control PWB is damaged by removing the cable without releasing the clasp. Trim off the damaged end, or replace the ribbon cable (3CM27010).

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here