Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Technician
    Join Date
    Nov 2008
    Location
    Jeddah , Makkah
    Posts
    37
    Rep Power
    22

    Unhappy Kyocera KM 4035 no display only fan working

    when power swich is turned on a blue screen comes on the display screen for a second and goes off sleep indicator is on and fan working..nothing else. can anybody help please.. battery is 2.95v

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Feb 2015
    Posts
    68
    Rep Power
    9

    Re: Kyocera KM 4035 no display only fan working

    If you open the document feeder when you turn it on, do you see the scanner mirror moving or the exposure lamp turning on?
    Machine runs on 110/ 220 down to 24 volts.

    My guess if only fan works, could be a bad main or power board.

    Sent from my SM-G930V using Tapatalk

  3. #3
    Technician
    Join Date
    Nov 2008
    Location
    Jeddah , Makkah
    Posts
    37
    Rep Power
    22

    Re: Kyocera KM 4035 no display only fan working

    Quote Originally Posted by patrickjlc View Post
    If you open the document feeder when you turn it on, do you see the scanner mirror moving or the exposure lamp turning on?
    Machine runs on 110/ 220 down to 24 volts.

    My guess if only fan works, could be a bad main or power board.

    Sent from my SM-G930V using Tapatalk
    Machine is as good as dead. No mirror movements, no exposure lamp. When I checked the power board output is giving 24v,3.9v,5.1v etc

  4. #4
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,168
    Rep Power
    79

    Re: Kyocera KM 4035 no display only fan working

    Any previous error code on the display?

    Might be a display panel or RAM DIMM?
    As a test, try another HDD., see if the machine gets POST and the display comes on.
    What if we could count the stars... , what number would you stop at...?"
    [Exchange manual acquisitions, PM's CTN members only. ]
    [] |N | | o | M | Δ | t | π | | x | []

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Feb 2015
    Posts
    68
    Rep Power
    9

    Re: Kyocera KM 4035 no display only fan working

    Quote Originally Posted by NeoMatrix View Post
    Any previous error code on the display?

    Might be a display panel or RAM DIMM?
    As a test, try another HDD., see if the machine gets POST and the display comes on.
    Its like a 20 year old machine, probably cost same as hdd

    Sent from my SM-G930V using Tapatalk

  6. #6
    Junior Member
    Join Date
    Oct 2016
    Location
    MISSOURI
    Posts
    1
    Rep Power
    0

    Re: Kyocera KM 4035 no display only fan working

    machine didn't come standard with a hard drive

  7. #7
    IT Manager 1,000+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    Florida
    Posts
    1,364
    Rep Power
    38

    Re: Kyocera KM 4035 no display only fan working

    Used to see this if firmware was bad , really old machine time to upgrade

  8. #8
    Technician
    Join Date
    Nov 2008
    Location
    Jeddah , Makkah
    Posts
    37
    Rep Power
    22

    Re: Kyocera KM 4035 no display only fan working

    I will try all these and come back to you. thank you all.

  9. #9
    Multibrands Tech 250+ Posts rapidocument's Avatar
    Join Date
    Jul 2012
    Location
    Los Angeles, CA.
    Posts
    308
    Rep Power
    19

    Re: Kyocera KM 4035 no display only fan working

    Remove covers and use a flashlight to see the wiring and boards inside, in the past I've seen chewed cables and mice pee-damaged boards, if it's your case not worth a repair, too much work, too much money and too much risk to your health...just a little advice.

  10. #10
    IT Manager 1,000+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    Florida
    Posts
    1,364
    Rep Power
    38

    Re: Kyocera KM 4035 no display only fan working

    firmware on this machine was tricky needed to use CF card, and small size 128 card large cards did not work and some brands worked some did not. Usually was it was the copier with the fax boards on them that we would see it , always had fingers crossed on on update until company got the Buffalo brand cards recommend by Mita
    My company was ECHEAPO
    Last edited by bsm2; 1 Week Ago at 01:16 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here