Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Jun 2011
    Location
    Jelenia Góra
    Posts
    7
    Rep Power
    0

    FS-4200DN Command Center RX reset password

    Hello,

    so i have 4 Kyocera FS-4200DN and i don't have passoword for them.
    if remember correct its first generation that have Commend Center RX

    Of course i tried many things (searched if there is keypad combination to reset default)
    I have tried Prescribe but i don't think that will work because is for older devices like FS-4020 :/
    When i try form KM-Net View i got error "not authorized" etc. from USB Drive its accepted but notin more :/

    In SM there is FRPO but no command to reset/change password (init could help but without actual default settings i don't want to do this).

    Any suggestion except Engine reset?

    PS: this devices don't have jumpers like older one so don't suggest to use jumper to reset password.

  2. #2
    Master Of The Obvious 10,000+ Posts
    FS-4200DN Command Center RX reset password

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,626
    Rep Power
    297

    Re: FS-4200DN Command Center RX reset password

    Just the Engine Reset. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Feb 2018
    Location
    Orlando, Fl
    Posts
    99
    Rep Power
    4

    Re: FS-4200DN Command Center RX reset password

    To use Netviewer,
    First access the device in KMNetViewer by using the "Administrator" password (usually the numeric password.)
    To do this, when you first "discover" the device in KMNetViewer use the "Administrator" password in the box for "Administrator Command Center Password" in the Communications dialogue and Admin/Admin for the Login dialogue.
    See
    ResetAdminPW.pdf

    Otherwise -
    Send this Prescribe command to the printer.
    !R! EGRE; EXIT; - initialize the engine board, resets all passwords.

  4. #4
    Junior Member
    Join Date
    Jun 2011
    Location
    Jelenia Góra
    Posts
    7
    Rep Power
    0

    Re: FS-4200DN Command Center RX reset password

    Ok i found a way to reset without resetting engine board.

    its that same way that one person post on forum but i wasn't sure that this will work with newer machine but its worked.

    its form this post FS-4020DN old firmware and Command Center password
    This is command reset password form DeviceAdmin not user Admin. But if you have DeviceAdmin then you can reset any password

    @GeneOR95
    i know how to use KM-Net and other Kyocera tools (not only public available - i was for over 15 yest certificated Kyocera Dealer) but this was not a answer to my question. but thx.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here