Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Sep 2017
    Posts
    3
    Rep Power
    0

    FS 4200 dead USB port

    Hello frinds! Has anyone managed to fix a USB PWB with dead usb on these printers? I have multiple Kyocera FS 4200 USB PWB that don't comunicate with the pc. The usb port is simply dead. The printers runs perfectly, except this. Thank you for your answers!

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Feb 2018
    Location
    Orlando, Fl
    Posts
    161
    Rep Power
    15

    Re: FS 4200 dead USB port

    The first thing I would check is in Command Center;

    Basic > Security > Device Security > Interface Block
    This page allows you to restrict access from each interface.
    Network, USB Device, USB Host, Parallel I/F, Optional I/F
    Specifies whether or not to restrict access from each of the interfaces above.
    Access from the interfaces that are set to Block is restricted

    If USB is blocked, unblock it and check.

  3. #3
    Junior Member
    Join Date
    Sep 2017
    Posts
    3
    Rep Power
    0

    Re: FS 4200 dead USB port

    Checked all items in that menu, all are set to "unblock". I think that is an electrical issue. A condenser or another piece from the usb PWB may be broken.

  4. #4
    Senior Tech 100+ Posts
    FS 4200 dead USB port

    Scott's Avatar
    Join Date
    Dec 2009
    Location
    mineola
    Posts
    174
    Rep Power
    33

    Lightbulb Re: FS 4200 dead USB port

    Not to sound stupid, but please tell me your talking about the USB port in the back and not the front.....just asking.

  5. #5
    Service Manager 1,000+ Posts
    FS 4200 dead USB port


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: FS 4200 dead USB port

    Are you computer savvy? Have you checked Windows Device Manager for a missing driver?

    When I setup printers out of the box the USB instructions are very particular about when to run the CD and when to connect the cable because you can get in this situation.

  6. #6
    Junior Member
    Join Date
    Sep 2017
    Posts
    3
    Rep Power
    0

    Re: FS 4200 dead USB port

    Yes, the USB port in the back of the printer. The one in the front is for other purposes. I know. The same printer works fine on USB, conects to PC and prints ok if I change the main PWB. The whole asembly with the USB port.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here