Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2011
    Posts
    97
    Rep Power
    30

    Problems with TR-8550 Transfer assy

    Hey Techs, has anyone been getting problems with these new transfer belts tr-8550, so far we have had a few tear at below 70k and some with hardened toner at exit nozzle causing smudges. All problems have been on high speed units 4052ci and 5052ci

  2. #2
    Service Manager 1,000+ Posts
    Problems with TR-8550 Transfer assy


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: Problems with TR-8550 Transfer assy

    Yes and yes. The clogged pipe will also cause a transfer motor stall code and gear ratcheting. Just warranty and move on.

  3. #3
    Master Of The Obvious 10,000+ Posts
    Problems with TR-8550 Transfer assy

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Problems with TR-8550 Transfer assy

    One of our techs worked on this issue yesterday. The call was for squeaking.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Apr 2017
    Location
    Manitoba
    Posts
    348
    Rep Power
    20

    Re: Problems with TR-8550 Transfer assy

    For us, actually so far so good, had a couple of early machines code with transfer cleaning motors while they were still young, then zero since. I haven't seen a torn belt ever, except for the stupid blue-dot-MK ones for the B+W older and 7002-type which don't want to stay centered.

  5. #5
    Master Of The Obvious 10,000+ Posts
    Problems with TR-8550 Transfer assy

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Problems with TR-8550 Transfer assy

    Quote Originally Posted by sparkycivic View Post
    For us, actually so far so good, had a couple of early machines code with transfer cleaning motors while they were still young, then zero since. I haven't seen a torn belt ever, except for the stupid blue-dot-MK ones for the B+W older and 7002-type which don't want to stay centered.

    Like this Sparky?:

    second transfer AlphardI.JPG

    Re-doing the shims seems to stabilize the centering. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Service Manager 1,000+ Posts
    Problems with TR-8550 Transfer assy


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: Problems with TR-8550 Transfer assy

    Quote Originally Posted by blackcat4866 View Post
    Like this Sparky?:

    second transfer AlphardI.JPG

    Re-doing the shims seems to stabilize the centering. =^..^=
    This thread is about the primary transfer belt. TR8550.

  7. #7
    Field Supervisor 500+ Posts
    Join Date
    Aug 2011
    Posts
    575
    Rep Power
    57

    Re: Problems with TR-8550 Transfer assy

    Hi guys,

    i am wondering a little bit about this thread.
    In europe we are facing a lot of problems with blocked waste drive and KDC said: We are the only ones. No informations from other markets about this problem available.
    O our market this problem is coming up after FW Pack 2.05 (disuse of overflow detection by the piezoelectric sensor)
    We found that wastebox can`t forward the waste toner if weight > 600g. Fulllimit by FW controlling 800g!
    Mostly happens at high humidity enviroment and rough paper usage.
    Iris high color and mono, not so often at Iris low.
    Exchange from waste drive unit, waste box unit, Belt, feed drive gear and sometimes DV + DK for yellow needed.
    Meanwhile waste drive unit and WTB unit would modified by KDC, but problem is still remaining.(not so often, but 2-3 times per week...)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here