COPYSTAR CS-5035.
Displays error code CO 0610 on startup.
I replaced both Ram memory.
Has same error code with new rams.
Could not find error codes in my manual.
Thank you.
COPYSTAR CS-5035.
Displays error code CO 0610 on startup.
I replaced both Ram memory.
Has same error code with new rams.
Could not find error codes in my manual.
Thank you.
hi dear technician friend NEEDHSD...means code c 0610
- BITMAP PROBLEM: there is a probleme with the data or adress bus of the bitmap DRAM
- CAUSES: defective main PCB
- SOLUTION : Replace the main PCB and check for correct opertion.
try this ..and good chance my friend NEEDHSD.
BEST TECHNICIAN . NICE PEOPLE .
Will the cs 5035 pcd be the same part as for the km-5035?
c0610 can show up for several reasons. as always: new fw first, then check connectors and last: change main pcb.
FirmWare
Thanks!
Bookmarks