I'm starting with firmware tomorrow, but if someone has a fix already that would certainlly save time. Thank's JDD
I'm starting with firmware tomorrow, but if someone has a fix already that would certainlly save time. Thank's JDD
C0630 DMA problem
• DMA transmission of compressed,
decompressed, rotated, relocated or
blanked-out image data does not
complete within the specified period
of time.
Defective main
PCB.
Replace the main PCB and check for cor-
rect operation.
BEST TECHNICIAN . NICE PEOPLE .
My manual does not show this code as an applicable code for the CS-3060. But that wouldn't be the first time that a code didn't show up in the manual.
It does apply to a CS-3040. As zaza quoted from the manual:
1) Reload firmware.
2) Reseat Main DIMM & reload firmware
3) Replace Main DIMM & reload firmware
3) Replaced Main Controller & reload firmware
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thank you I will post with outcome
ADF cable had to be replaced -done deal-
http://www.copytechnet.com/forums/ky...de-0630-a.html
from a earlier post
madas
sorry tried to link it but link did not appear
http://www.copytechnet.com/forums/ky...de-0630-a.html
oops click on the blue!
madas
Last edited by madas; 03-31-2010 at 02:59 AM. Reason: link worked
replace cable video signal dp700
Bookmarks