Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1

    Join Date
    Jan 1970
    Posts
    0
    Rep Power
    0

    Triumph Adler DC 2080 ( Kyocera KM 8030) firmware upgrade

    Hi

    After beeing unsuccesfull to connect the copier to a Mac computer with
    Leopard OS, for scanning, i tried to upgrade the firmware of the copy machine to have the SMB service enable . The upgrade was successful, but when i try to enable SMB in the U 512 service mode, the machine
    beep ( two time) and the SMB option still " Off", what is wrong ?

  2. #2
    Master Of The Obvious 10,000+ Posts
    Triumph Adler DC 2080 ( Kyocera KM 8030) firmware upgrade

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463
    Perhaps your IB-23 scan card is dead. Are you able to scan to FTP or email? Have you tried a U504 initialize scan card?

    Be sure to write down or backup any settings or addressbook entries, because they will go "poof!" gone. If the scan card is locked up you may not be able to access any of that.

    Curiously, I must have an old version of the manual, because it does not show U512. Good Luck =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    The Great Gazoo 250+ Posts kyoceradude's Avatar
    Join Date
    Aug 2006
    Location
    St. John, IN
    Posts
    442
    Rep Power
    40
    I had an issue with the scanner card on one of our machines. (NS30). I had to upgrade the firmware on the NS30 card using IBVERUP... in order to use the SMB feature on the KM-6030...
    My mission here on Earth is to help all you Dum-Dums!

  4. #4

    Join Date
    Jan 1970
    Posts
    0
    Rep Power
    0
    Quote Originally Posted by kyoceradude View Post
    I had an issue with the scanner card on one of our machines. (NS30). I had to upgrade the firmware on the NS30 card using IBVERUP... in order to use the SMB feature on the KM-6030...


    Thanks Kyoceradude, i think you're right ! I have to do the same for a DCC 2520. I ignored that the scanner on those machines has
    to be upgraded from a computer.

  5. #5
    Master Of The Obvious 10,000+ Posts
    Triumph Adler DC 2080 ( Kyocera KM 8030) firmware upgrade

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463
    Another thought: Is Enterprise Mode enabled? If Enterprise is on Scan to SMB is not possible. The explanation that I got had something to do with shared resources...
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here