KM-1530

[mata]

Can anyone send me a service manual for KM-1530.
I changed developer and get C710 error as soon i turn machine on.
Cheked cables of toner sensor but everything seems ok.
Then i get old dev back and machine works fine!!! (except bad copy due to bad dev) Put new dev again and again C710.
It drives me crazy. What now???

Tnx

[Berny]

did you initialize the new developper ? ( 10871087 run U130 )

[mata]

Yes but nothing happens.
I suspect that the toner motor is faulty but don't know program mode to turn it on and check. If you have manual please send it to matabg@gmail.com

[Berny]

sent

[LNorris]

the dev is empty. run sim 130

[mata]

Tnx for fast reply.

I'm going now to do what your avatar says...

[Joe Karanja]

What man? if that's the case then simply your new Dev is bad.return the dev and let the seller give you a good Dev.

[mata]

The toner motor was faulty. One of the gears inside broke ( i must had to open it ). Take used motor from some Utax machine and now works perfectly...

Tnx for help