Good machines???
Thanks: 0
Likes: 0
Dislikes: 0
Good machines???
yes! why?
Solid, high volume workhorses.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I service both Ricoh and Kyocera copiers and I have the opportunity to get either a KM 6030 or 8030. I did a side by side between the KM 8030 and the Ricoh 2075 and they appear to fairly equal. What one has the other may not and vice versa. The 8030 has a little over a million copies and the 6030 under 500,000 I believe. I already have a Ricoh 1075 and I really don't want to go down in speed. I'm not sure if it would be a wise investment to get a 8030 with a million plus copies. I use these high speed copiers for short term rentals.
1M copies is just two short PM cycles. It's a baby!
I've only worked on a few AF-1075's but I seem to recall issues with the toner suction tubes, and the semi useless large capacity tray that doesn't want to slide over the stack of 4 reams of paper. True or False?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
They are very good machines, do the full PM at 500k cycles and these machines will perform well.
Reply With Quote
Bookmarks