HELLO ALL! i needed some information on this model when the panel show "maintenance periodly" , what counter should be reset ? how to carry ouy maintenance procedure ? THANKS .Any suggestion is welcome.
HELLO ALL! i needed some information on this model when the panel show "maintenance periodly" , what counter should be reset ? how to carry ouy maintenance procedure ? THANKS .Any suggestion is welcome.
Here is the deal...
When the panel says maintenance... that means that either the drum, developing unit or fuser are past their maintenance limit... their may be other parts that have a maintenance limit. Your best bet is to go into maintenance mode and reset what you need to but be careful some machines will let you reset the life counter for the copier and that could get you fired... lots of luck and have fun...
Sad To Say I Don't Have a Life
I do this stuff on the weekends too
Get into maint. mode 10871087 make sure sim# 250 is set to 15000 this is the maint. cycle per Kyocera. Check the attachments, thay should help.
Bookmarks