Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: km-2525

  1. #1
    grumpy old git 500+ Posts banginbishop's Avatar
    Join Date
    Oct 2007
    Posts
    894
    Rep Power
    46

    km-2525

    Multiple problems

    1. "reset originals in doc feeder" on display

    2. c0640 - hdd error

    3. Can't access the scanner functions e.g. scan to email etc

    I've checked the doc feed sensors and ran in sim mode. Tried the whole document feeder on another machine and it works fine.

    I have today replaced the Hdd with a brand new one

    I have put the scanner board onto another working machine and the scanner function works.

    I can now only presume that the main pwb is faulty - i couldn't swap that as the other machine i was using was a 2525e - yes i tried

    If you run 906 it resets the scanner but throws up the c0640, i can't format the hdd either in 024.

    I replaced the hdd behind the main board/scanner card not the optional one by the print controller board.

    I'm back tomorow with hopefully a main board from a donor machine to try.

  2. #2
    Anjin
    Join Date
    Mar 2008
    Location
    Italy
    Posts
    20
    Rep Power
    33

    format !..or change..

    must! .. scanner work on hard disk, if you do not try to change formats! .. is he ..

  3. #3
    Field Supervisor 500+ Posts aabarnes1's Avatar
    Join Date
    Mar 2009
    Location
    Dublin
    Posts
    620
    Rep Power
    0
    Quote Originally Posted by banginbishop View Post
    Multiple problems

    1. "reset originals in doc feeder" on display

    2. c0640 - hdd error

    3. Can't access the scanner functions e.g. scan to email etc

    I've checked the doc feed sensors and ran in sim mode. Tried the whole document feeder on another machine and it works fine.

    I have today replaced the Hdd with a brand new one

    I have put the scanner board onto another working machine and the scanner function works.

    I can now only presume that the main pwb is faulty - i couldn't swap that as the other machine i was using was a 2525e - yes i tried

    If you run 906 it resets the scanner but throws up the c0640, i can't format the hdd either in 024.

    I replaced the hdd behind the main board/scanner card not the optional one by the print controller board.

    I'm back tomorow with hopefully a main board from a donor machine to try.
    Try a u20 (initialize all memory) then a 906 then a 24 or a scandisk and see how that works. AlsoI know it's a bit silly but make sure the jumpers on the new hdd are set the same as the old one.

  4. #4
    Master Of The Obvious 10,000+ Posts
    km-2525

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462
    Personally I think the optional hard drive is what you need. That would account for the lack of scanner functions, HDD error, and DP loss of function. You can try the U024 & U020. You might get lucky.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    grumpy old git 500+ Posts banginbishop's Avatar
    Join Date
    Oct 2007
    Posts
    894
    Rep Power
    46
    The customer has the m/c's all set up for a server in germany (global car maker) so every m/c can scan to email, print server goes through germany then back to the m/c. They dont have the optional hard drive on any of the 3 current 2525 m/c's. I'm reluctant to try a reset on the memory but i might have to if i cant get hold of a main board to try.

    I made sure the jumpers were set correctly - again the other m/c had the same hdd so i just copied the jumper setting.

    As i said i'm back today to try something else so i'll post back.

  6. #6
    grumpy old git 500+ Posts banginbishop's Avatar
    Join Date
    Oct 2007
    Posts
    894
    Rep Power
    46
    Ok - m/c is now working again.

    Result, faulty HDD received from kyocera. Brand new Hdd but didn't work, m/c was seeing the hdd but you coudn't format it. Put an old hdd on from a another m/c to try and it worked fine.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here