Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    technician
    Join Date
    Jun 2009
    Location
    Dale City, va
    Posts
    18
    Rep Power
    31

    KM3030? with PF750 lct

    This is the side by side LCT. If you feed only from the left side it feeds fine. However if you try to feed from the right side it jams about every 10 -20 copies. I have replaced the conveyer base, all 4 clutches, the feed roller for the right side & swapped all the sensors. It still jams right by the roller on the bottom left tray. I replaced that as well.

  2. #2
    Master Of The Obvious 10,000+ Posts
    KM3030? with PF750 lct

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462
    I think you mean KM-3050. Try this one:
    http://www.copytechnet.com/forums/ky...f750-jams.html

    The plastic features that secure the left side pickup roller typically break. There is a new style feed frame, but there is a better solution. Drill a #40 hole through the metal flange that is flopping around, and tap the metal M3 x 0.5. Remove the metal plate and enlarge the hole in the plastic to #31. Countersink the plastic from the bottom side, so that an M3 flathead screw sets flush with the plastic. Assemble.

    I have heard that the new style feed frame breaks in exactly the same place, and takes quite a bit more work.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Master Of The Obvious 10,000+ Posts
    KM3030? with PF750 lct

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462
    Just did another one today. Here are the pix.


    The first one is the finished view from the bottom showing the recessed screw head:

    PF750 Noise3.JPG

    The second one is the drilled, tapped, and countersunk view from the bottom:

    PF750 Noise1.JPG

    The third one is the finished top view showing the screw protruding slightly from the bracket:

    PF750 Noise4.JPG

    The fourth one is the drilled, tapped view from the top:

    PF750 Noise2.JPG

    Sorry for the tiny excerpts of the photos. The thread won't take the full JPEG files at 3 to 4 MB each. Honestly I'm amazed by the resolution. I thought I had cleaned up the unit after drilling, yet you can see every bit of plastic & steel dust. If you'd like to see the full sized pix send a private message with email destination. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Field Supervisor 500+ Posts Jimbo1's Avatar
    Join Date
    Mar 2008
    Location
    Broken Arrow, OK
    Posts
    845
    Rep Power
    41
    We have never had any of the new ones break. I keep them rebuilt on the shelf for both versions.
    It's a lot easier than doing all that at the customer's office. Once you get used to rebuilding them you can do one in about an hour with the new frame.
    "Some days you get the bear, some days the bear gets you."

    Cdr. William Riker

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here