I try to perform firmware update of taskalfa 300ci the machine won't boot on the memory stick.
I try to perform firmware update of taskalfa 300ci the machine won't boot on the memory stick.
Can you be more specific? Exactly what happens when you try to load firmware? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
1. bad memory stick... go test it...
2. you unpacked the firmware into a folder and placed that folder on the memory stick... firmware has to be placed directly on the stick... no folders... straight first level...
3. you have a bad main board...
most likely culpritt... is #2
Sad To Say I Don't Have a Life
I do this stuff on the weekends too
Thank you so much I did't unpack the firmware. Thanks again.
Bookmarks