Taskalfa 300ci color issues

[10871087]

Unzip the attached 2 file to the root of a USB stick and update firmware. Make sure no other files are on the stick. To go back to "No Color Table" Just update firmware as normal. Make sure you have current firmware done before changing the color table. This is for a BizHub 451 color table.

I have used this more the once for customers that grown accustom to the pastel colors of their old Bizhub color boxes.

[spiderman76]

Is it possible to apply this color table on Km-2525 ???

[kyoceradude]

No, sorry. These files are strictly for the T/A 250,300,300 & 500.

[COPIADORAS ALGUERO]

Hi, print a technical status report, and check humidity and temperature values, have you connected the jumper connector of the cassette heater wire? And check item U327, the value of this item is mode 2, it's very important to connect the jumper if you have a humidity value over 35%.

Good luck

[Absurd]

Not HP.. The color tables I'm refering to is Minolta. If a customer is set on the Minolta BizHub 451 color (which I do not sell and they were demoing at the same time as my T/A 500ci) and I have the ability to add firmware to the T/A color line to match a Minolta BizHub 451 color output(it matched perfectly) I got the sale for a T/A 500ci. So, it's not as simple as just let the customer choose which color output they want. If they choose a machine I don't sell, I don't get the $$$$$$$.

so where do you go to get the tables from? can you search and download or what?

[spiderman76]

Possibly, can I remove the Bizhub color table installed on taskalfa?

[kyoceradude]

absurd: You can get the color tables from your tech rep. I'm not sure if they are online from KMA.


spiderman76: To get rid of the installed color table, all you need to do is reflash with current firmware. There is a reset file, but I just reflash firmware.

[Santander]

Turn on the continuous tone. Check this box in the imaging tab on printing preferences and you will see an improvement. Adjust the trapping to medium or heavy to avoid white dots between colors or mis-placement of adjoining colors which leads to a print looking murky.

[spiderman76]

How activeted the Minolta BizHub 451 color table , after upload it on TaskAlfa 250 ????