Receiving a "Drawer inoperable" error display... copier will only use the bypass tray.... it does not notice any other paper tray? Any suggestions or known resets?
WML
Receiving a "Drawer inoperable" error display... copier will only use the bypass tray.... it does not notice any other paper tray? Any suggestions or known resets?
WML
Make sure there are no obstructions around the cassette and run sim 96.
I think it is 906
hi...why don"t you check the paper cassette lifting mechanism?...maybe theres wrong with the motor or the gears...thanks
906 is for the digital machines. Maintenance mode in the analogs only have 2 digits.
Pull out the drawers and check behind them for small scraps of paper stuck in the connectors at the rear of the drawers. Sim 96 should do a "Reset disable function" on this machine. Check both the connector on the drawer itself and the connector it plugs into inside the copier.
But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.
I ran sim 96 and machine comes up with C251 error? any suggestions?
I ran the sim 96 and machine came back with check drawer and the C251 error. Any additional suggestions? Thanks
I checked around drawers and ran the sim 96 display said check drawer and then displayed C251 error. Any additional suggestions?
C251 = Drawer 2 lift motor problem
Either lifting is bad or it doesn't detect the lifted paper. Could be bad motor, bad switch, broken lift mechanism, bad connection to switch, etc.
Bookmarks