CS8030 hard drive

[netad1]

Our lease is up and I need to ship the machine out of state, but need to clean off the hard drive first. Is there a quick and easy way to do this?

[blackcat4866]

Just re-format it. Run U024. Don't forget to make note of the Destination (U265: 02 for Kyocera, 66 for Copystar). Damn, there are quite a few things lost, see below:

Enable LDAP: 10871087, 508, Start, ON, Start, Stop
Set Destination: 265, Start, 66, Start, Stop.
Set Paper Size Large Capacity Tray: 208, Start, Side Feeder, select correct paper size, Start, Stop, 001, Start
Re-enter Printer IP: Printer, Printer Menu, Interface, TCP/IP, Change, DHCP to OFF, Bootp to OFF, enter IP address, enter Subnet Mask, enter Gateway.
Enable Corporate address book: System Menu, Scanner Basic, Corporate Address Book, Change to ON, enter IP address of LDAP Converter Utility (currently 172.24.1.157).
Re-enter Scanner Settings via Web Interface.
Create One User: System Menu, Scanner Default, Register, set #001 email as Department@copytechnet.com , set Display name as Department Name, Complete Entering key.
Turn off Display Sender Screen: System Menu, Functional Default Setting, Selection Of Sender (users), Change, set to ON.
Set Output Tray for Copy: System Menu, Machine Default, Select Copy Output Mode, Select “B”.
Set Output Tray for Printer: System Menu, Printer Default, Paper Handling, Paper Output, select “A”.
Set Scan to Email default file type: System Menu, Scanner Default, Functional Default Setting, Scan File Type, change to PDF.

This will do the trick. =^..^=

[RCR]

Hy netad 1

this is a simply way that you can use:
First:
Sim U000 stamp the maintenance mode.

Then execute this simulation to reset the machine:
Sim U020; 021 ; 022
Sim U024

then you can insert the main data by using the stamp of the Sim U000 previously saved.