make sure you have the new version 8 firmware installed, taskapha has had ongoing problems with toner density and toner supply rate and the new version 8 firmware seems to have got to the bottom of this problem.
Thanks: 0
Likes: 0
Dislikes: 0
make sure you have the new version 8 firmware installed, taskapha has had ongoing problems with toner density and toner supply rate and the new version 8 firmware seems to have got to the bottom of this problem.
Actually firmware v. 9.00 just came out a few days ago. Firmware upgrades arrive at ~ once a month. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Hi,
I have install the Color Table from Bizhub 420 in the taskalfa 250ci as special frmware,but I don't know about the process in order to activate that.can someone help me?
Sorry about the question - how exactly can i use color table of bizhub on task alfa 250?
Thanks to all for the information and advice...
I found that after factory resets replacing transfer units and gutting and cleaning the machine i found the charge and transfer voltages were played with before we recieved the machine so i got a copy of all the settings from another machine and copied them one after the other. i also refit the old transfer unit and did a copy...
Perfect!
Sharp solid colours...
machine was sold 2 hours later
Congratulations! =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Unzip the attached 2 file to the root of a USB stick and update firmware. Make sure no other files are on the stick. To go back to "No Color Table" Just update firmware as normal. Make sure you have current firmware done before changing the color table. This is for a BizHub 451 color table.
Hi
Can anyone tell me what the settings are, that have to be changed if the prints have more than 15% coverage on the page?
Thnks in advance
Simulation U486 > select Mode 2
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thank you very much
Reply With Quote
Bookmarks