Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician helpmepleaze's Avatar
    Join Date
    Mar 2010
    Location
    tulsa
    Posts
    16
    Rep Power
    29

    Kyocera cs-8030: How to replace the felt roller?

    How to replace the felt roller on kyocera cs-8030 and reset counter?

  2. #2
    Master Of The Obvious 10,000+ Posts
    Kyocera cs-8030: How to replace the felt roller?

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,468
    Rep Power
    463
    I'm thinking that you mean the web and cleaning rollers. Those are the two maintenance parts referred to by that counter.

    The fuser removes easily enough. Remove the lower fuser inlet guide (one screw, then it swivels up on the bushings and comes off). There is a metal locking bracket that must be removed from a recess below the edge of the front drawer cover. The web is accessible by removing the top cover, then the web holder (4 screws). The cleaning roller can be accessed by removing the two screws that mount the cleaning roller holder (the lower exit guide is mounted to the cleaning roller holder).

    The reset is simple. from the Copy screen, 10871087, 909, Start, 0, Start, Clear, Clear, 001, Start. Also check that simulation 194 is set to Count: 66, Turns: 3. There have been quite a few changes in the recommended values for the web usage, but 60 to 66 works best to keep the upper fuser roller clean, but requires that the web be replaced before 500k prints.

    It sounds like you may need a tech to help you out with this task. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician helpmepleaze's Avatar
    Join Date
    Mar 2010
    Location
    tulsa
    Posts
    16
    Rep Power
    29
    Thank you so much it works!!

  4. #4
    Master Of The Obvious 10,000+ Posts
    Kyocera cs-8030: How to replace the felt roller?

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,468
    Rep Power
    463
    I really hope that you replaced the parts, and didn't just clear out the maintenance message. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Field Supervisor 500+ Posts aabarnes1's Avatar
    Join Date
    Mar 2009
    Location
    Dublin
    Posts
    620
    Rep Power
    0
    Couldn't help laughing at that, sorry
    Grant me the serenity to accept the things I cannot change.

  6. #6
    Junior Member
    Join Date
    Sep 2019
    Location
    Islamabad
    Posts
    1
    Rep Power
    0

    Re: Kyocera cs-8030: How to replace the felt roller?

    Thankyuou Now its working properly

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here