hello i did not even to try update firmware pls help me how to update for this two machine?
hello i did not even to try update firmware pls help me how to update for this two machine?
ERROR HELP ME AND HELP YOU
1820 - Remove memory cover on right side of machine, one screw/pin. Remove plate inside, two screws. Insert CF card with files on root.
2810 - USB drive with files on root in the USB slot in front.
For both, power off, insert appropriate media, then turn on. Firmware will update automatically. Then wait until it says completed.
I have the same problem, where can I get the firmware file from? I tried looking online but no luck.
Screwdriver, what problem are you having. No one will share but I can't imagine this rudimentary machine needing firmware
Everytime I turn on the Printer, it displays Kyocera and thats it...it will just be like that for as long as it is on. I read somewhere here that you should upgrade the firmware using a SD card...so I got a card but can't find the firmware anywhere online.
dont worry about firmware...its now a papwer weight... most likely the main board is shot which will cost more than the machine is worth
Had a couple of these it is either the main board or the memory. Try the memory stick first
"The Serenity Prayer" . . .
God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .
"The Serenity Prayer" . . .
God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .
Bookmarks