Kyocera Mita KM-2030 C710 Problem

[goldencup]

Hi! I would like to ask about KM-2030. How do you handle the problem C710? I've check the toner motor and it's working. I've tried the U130 mode but still not solved the problem. the INPUT: is fixed to 255, usually when i do it on other machine the reading changes and does not reach to 255. What seems to be the problem? Thank you very much!

[happicopy]

make sure you are using the right TONER,U130 is for developer installation wont solve ur problem.try to execute U135 first( to force toner motor to run) then u132 : alternately with U135. after a while doing it( not to many u135 because this might overtoned the developer), check for the sample copy usually with U000. if the image is good enough for you, check for the u131, good value are around 141.then perhaps u can run u130 if the image are good enough.