hello ,
I need to help about KYOCERA KM 4050 ERROR CODE "C 0060"
was changed harddisk and
uploaded firmware version "2GR_2000.027.018 2009.04.02"
it have new firmware than mine ? or service bulletin about it.
Thanks: 0
Likes: 0
Dislikes: 0
Kyocera km 4050
hello ,
I need to help about KYOCERA KM 4050 ERROR CODE "C 0060"
was changed harddisk and
uploaded firmware version "2GR_2000.027.018 2009.04.02"
it have new firmware than mine ? or service bulletin about it.
You've got firmware version 2.40. There are newer versions, most recently 2.44 (4-27-2010), but there weren't any "bad" firmware levels to avoid. Anything over version 2.06 should speed up the panel operation and be problem free. Have you run U024 to format the new HDD?
C0060 does not necessarily point to a HDD. Is it possible that the wrong model main PWB or wrong main DIMM has been installed? I would check there first. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
coo60 OFFFFFF
I agree that this code is not Harddisk
Code means the main board failure
But through my experience just got me the same problem I've re-programming of the EPROOM itself
Originally Posted by Mohammad.anwar
which EPROM reprogrammiing
i AM converting spped for km3050 to km5050 this is working good .i am using another 5050 machine spped ram pcb ,i dont know ram modal no please inform the modal name
teconcopierservices@gmail.com
C0060 = Main PWB type mismatch error.
The original post for the malfunction code is over 3 years old. The new guy has a question about speeding up a slower machine.
Reply With Quote
Bookmarks