Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: FS-C5016N

  1. #1
    Technician
    Join Date
    Aug 2010
    Posts
    10
    Rep Power
    28

    FS-C5016N

    Almost every single prints are jamming/stopping right before the fuser roller. Its always the leading edge of the paper barely touching the heat and press rollers. Both fuser and transfer unit assemblies are brand new. Pressure/gap between the heat and press rollers are not the issue. Id say 1 every 3 prints this jamming occurs...and there are times that you cant get a single print out of it.

    93,534 clicks on the machine. updated to the latest firmware.

    Thanks in advance!

  2. #2
    Master Of The Obvious 10,000+ Posts
    FS-C5016N

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,434
    Rep Power
    462
    Can you get an error log to print? What jam codes? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 250+ Posts madas's Avatar
    Join Date
    Aug 2008
    Location
    NZ
    Posts
    313
    Rep Power
    35
    Hi, Take the transport section out and clean the sensors in the left had side wall inside the little holes, also make sure the 2 sensor arms on the transport section move freely and the reflective ends are clean. does it jam from the manual feed?

    madas

  4. #4
    Technician
    Join Date
    Aug 2010
    Posts
    10
    Rep Power
    28
    Quote Originally Posted by madas View Post
    Hi, Take the transport section out and clean the sensors in the left had side wall inside the little holes, also make sure the 2 sensor arms on the transport section move freely and the reflective ends are clean. does it jam from the manual feed?

    madas
    yeah, those little sensors on a little board unit is called the PK 982 sensor assembly...was same jamming after cleaning those sensors. ordered that sensor board unit, replaced and worked like a brand new machine. a 300 page print job was in the print pool...every single pages printed out without a single jam.
    thanks for the infos, guys! (i almost ordered a new fuser and transport assembly).

  5. #5
    Technician
    Join Date
    Apr 2016
    Location
    Wilmington
    Posts
    12
    Rep Power
    17

    Re: FS-C5016N

    Quote Originally Posted by madas View Post
    Hi, Take the transport section out and clean the sensors in the left had side wall inside the little holes, also make sure the 2 sensor arms on the transport section move freely and the reflective ends are clean. does it jam from the manual feed?

    madas
    Hi MADAS,

    my reply is very delayed but I have similar issues. My print do get stuck direcly before the fuser, most of the time the printer is cold.

    Can you show me which sensor do you mean?

    here a sketch. Thank you.



    BR
    Bob
    Attached Images Attached Images

  6. #6
    Technician
    Join Date
    Apr 2016
    Location
    Wilmington
    Posts
    12
    Rep Power
    17

    Re: FS-C5016N

    Quote Originally Posted by Loud Grinding Noise View Post
    yeah, those little sensors on a little board unit is called the PK 982 sensor assembly...was same jamming after cleaning those sensors. ordered that sensor board unit, replaced and worked like a brand new machine. a 300 page print job was in the print pool...every single pages printed out without a single jam.
    thanks for the infos, guys! (i almost ordered a new fuser and transport assembly).
    There is an error in the post.
    The Sensor is is called KP-982.

    Does anyone knows how to test this sensor unit?

    Greetings

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here