Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Master Of The Obvious 10,000+ Posts
    KM-2050 Scanner Web Interface

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,399
    Rep Power
    248
    Congratulation on the small successes.

    Yes, you won't be able to access the scanner web page when it's in energy saver mode, or when you are in the MFPs scanner menu.
    Make sure all the connections are made to the fax card. It's easy to forget one (take it from me). Try the U600 fax initialize.

    You are making progress, probably just slower than you'd like. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  2. #12
    Technician TJ001's Avatar
    Join Date
    Nov 2009
    Location
    Pretoria
    Posts
    27
    Rep Power
    17
    Make sure you put the country code in again U600 after you did the reset.


  3. #13
    Junior Member
    Join Date
    Oct 2010
    Posts
    7
    Rep Power
    0
    So I did a u600. Question: what country code should I be using for US? 000 or 181? I tried both but neither worked. Tried even dumbing down all the settings like if I were setting it up for using over Voip. It just won't answer automatically (won't detect ring?). Here's a copy of the self status report. Maybe there's just a setting I missed?

    Just to reiterate, I did check all the connections on the fax card, and this was working completely ok until I did a u020 to fix the printer issue. The machine hasn't been moved and isn't actually throwing any error codes. It's just not answering the phone. fax settings.pdf


  4. #14
    Master Of The Obvious 10,000+ Posts
    KM-2050 Scanner Web Interface

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,399
    Rep Power
    248
    I was just having this discussion with another tech.

    I leave all-clear functions as a last resort. The thing is, it's really difficult to get all those settings back to where they were before the clear. In the US it's country code 181. Do you have a U670 report from before the all clear? That would be really handy.

    I only have two of these with a fax, and I don't see them very often. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here